Debris & Waste Management Netting

No-climb Debris Netting

Litter or Waste debris netting was designed was designed for the disposal industry to contain trash in a specific area of the landfill.

Netting generally is made from Polypropylene but sometimes is made from polyester. Polypropylene netting comes in Standard roll sizes of 6 ½, 12 ½ and 25’ High by 150’ long. This type of netting is hung using Auto hog Rings whereas the Polyester netting comes with a 3/8” rope border and generally is hung using 8mm spring snap hooks.

Additional Products

We can supply you with all the hardware needs that you might have. From the wire, cable clamps, spring snap hooks, turnbuckles and much more. Should you require wood poles to be installed we can also supply & install these.

Request A Quote

Manufactured from the Most Advanced Materials

Manufactured from the most advanced materials in a wide range of meshes which range from 3-1/2″ to solid. Debris nets are available with fire retardant. Protective netting applications can be used in a diversity of applications which include:

• Scaffolding Enclosures
• Baseball, Golf and Sports Venues
• Facade Protection and Containment
• Ceiling and Roof Containment
• Sidewalk Overhead Protection
• Protection Over Roadways and Streets
• Separation of Trades
• Public Transportation
• Adjacent Property Protection
• General Debris Protection

Noteworthy

80% woven screen is available | Wood Poles 25' on center, steel 50'| Cable support recommended at 5' on center

1/4" No-Climb Debris Netting

Product: 24-gauge Raschel (12 needles/inch), elongated honeycomb hexagon (32spi). Approximately 1/4" openings.
Yarn Specifications: 85%-1000 Denier Dacron Polyester, 15%-150 Denier Dacron Polyester
Burst Strength: 120 psi
Break Strength: 180lbs (warp), 82lbs (fill)
Mesh Size: 1/4" 
Colour: Black
Finish: Fire Retardant 

Request A Quote